AMF Roadmaster
Used 49cc Moped Parts for
Sale.
from a complete part out of a 1978 AMF Roadmaster Moped.
Last Updated 5/5/10.
AMF Roadmaster
Used 49cc Moped Parts for
Sale.
from a complete part out of a 1978 AMF Roadmaster Moped.
Last Updated 5/5/10.
These used moped parts are from a 1978 AMF
Roadmaster moped with a 49cc 1HP McCulloch engine that is designed to go
20mph. This moped was missing some parts, like a throttle, and the wheel
rims are rusted. This product was originally manufactured by AMF.
AMF was originally the American Machine and Foundry company.
Ed's
AMF
Roadmaster moped parts
are now listed at EdsSurplusForSale.net,
an eBay prostores store with a very convenient pay by
paypal option.
All moped parts are used and sold "as is" with no
refunds.
All parts are accurately described to the best of the seller's ability, but they
are not guaranteed to work in your moped. All parts are sold
"as is", with no legal liability whatsoever for the seller if they
ever malfunction in your moped.
AMF Roadmaster Moped
McCulloch Internal 49cc Used Engine Parts
AMF Roadmaster Moped
McCulloch External 49cc Used Engine Parts
AMF Roadmaster Moped
McCulloch Carburetor and Gas Tank Parts
AMF Roadmaster Moped Frame Parts
AMF Roadmaster Moped Front Forks and
Front Fender Parts
AMF Roadmaster Moped Handlebar Frame
Parts
AMF Roadmaster Moped
Handlebar Control
Parts
AMF Roadmaster Moped Electrical
Parts, Including Lights and Horn
AMF Roadmaster Moped Wheel Parts
including Brakes
AMF Roadmaster
Moped Internal Used Engine Parts for the McCulloch 49cc Engine Model # 40000.9B.
Note: all parts are used and sold "as is".
| Item Num. | AMF Roadmaster Part # | Description | Quantity | Where part is listed for sale | Description | |||||
| RMI01 | N/A | Champion DJ8J spark plug (for the AMF Roadmaster moped McCulloch 49cc engine). | 1 | EdsSurplusForSale.net | Used. It is the used spark plug that was installed in the engine. I'm not sure if it is the exact spark specified or included by the manufacturer. Probably not very old, since its not rusted. | |||||
| RMI02 | N/A | Damaged/broken AMF Roadmaster moped McCulloch 49cc cylinder and partial engine case. Includes Cylinder (presumed broken), very small cylinder release valve (presumed unremovable), and a base to connect the crankshaft, crankshaft assembly, and carburetor parts to. | 1 | NOT FOR SALE. | Failed Q.A. check. | Used. Cylinder has gouges in 2 areas and is presumed broken. Has an ID plate imprinted with "MCCULLOCH CORP USA MOD400009B" and a serial number. | ||||
| RMI03 | N/A | Crankcase crankshaft needle bearing pin. | 26 | EdsSurplusForSale.net | Used. Caution: These fall out very easily. Note: This is different from the smaller approx. 6mm long piston crankshaft needle bearing. | |||||
| RMI04 | N/A | Presumed broken piston (for the AMF Roadmaster moped McCulloch 49cc engine). | 1 | NOT FOR SALE. | Failed Q.A. check. | Used. This piston has serious gouges in 2 areas and is presumable broken. There is a very slim chance it might be usable. Presumed broken. | ||||
| RMI05 | N/A | Top piston ring (for the AMF Roadmaster moped McCulloch 49cc engine). | 1 | SOLD | Used. Rare part. Probably works. Might be usable for a bottom piston ring, too. | |||||
| RMi06 | N/A | Piston/gudgeon pin (for the AMF Roadmaster moped McCulloch 49cc engine). | 1 | EdsSurplusForSale.net | Used. Connects piston to connecting rod. | |||||
| RMI07 | N/A | Small piston circlip (for the AMF Roadmaster moped McCulloch 49cc engine). | 2 | NOT FOR SALE. | Used. 2 of these keep the piston/gudgeon pin in place inside the piston. | |||||
| RMI08 | N/A | AMF Roadmaster Moped RMI08 Piston rod with complete piston needle bearing pins. Does not include any piston crankshaft needle bearing pins. (For the AMF Roadmaster moped McCulloch 49cc engine). | 1 | EdsSurplusForSale.net | Used. For the AMF
Roadmaster moped McCulloch 49cc engine. Does not
include piston crankshaft needle bearings pins for the end that connects
to the crankshaft connecting bolt and bushing. Does not include
heavy bolt and bushing to connect the piston rod to the crankshaft. Sold
"as is". Note: If you want to be sure to keep all of the piston needle bearing pins in place, I recommend that you buy the piston/gudgeon pin (part RMI6) too to keep the piston needle bearings properly in place during shipping. |
|||||
| RMI09 | N/A | Crankshaft (for the AMF Roadmaster moped McCulloch 49cc engine). | 1 | SOLD | Used. Does not include heavy bolt and bushing to connect the piston rod to the crankshaft. | |||||
| RMI10 | N/A | Heavy mounting bolt to connect the piston rod to the crankshaft. It is a T40 torx bolt with M10, 1.5 pitch threads and a smooth round surface area for a bushing and one end of the connecting rod to fit around. (For the AMF Roadmaster moped McCulloch 49cc engine). | 1 | EdsSurplusForSale.net | Used. Does not include the bushing that fits around it. T40 torx bolt with require a special T40 torx screwdriver bit to bolt it in. It was initially heavily torqued (i.e., screwed in very tightly with a lot of pressure). | |||||
| RMI11 | N/A | Bushing that fits around the heavy mounting bolt to connect the piston rod to the crankshaft and inside one end of the piston rod. (For AMF Roadmaster moped McCulloch 49cc engine). | 1 | EdsSurplusForSale.net | Used. | |||||
| RMI12 | N/A | Mounting nut for flywheel/magneto (for the AMF Roadmaster moped McCulloch 49cc engine). | 1 | EdsSurplusForSale.net | AMF Roadmaster Special Exterior Mounting Nut for the Flywheel/Magneto for the McCulloch 49cc Moped Engine. | |||||
| RMI13 | N/A | Exterior flywheel/magneto (for the AMF Roadmaster moped McCulloch 49cc engine). | 1 | SOLD | AMF Roadmaster Exterior Flywheel/Magneto for the McCulloch 49cc Moped Engine. Used. Heavy. (It weighs 3 lbs., 5 ounces.) Fits onto the outside end of the crankshaft. Does not include the special external flywheel/magneto mounting nut. | |||||
| RMI14 | N/A | Small base plate mounting bolt for Flywheel/magneto coil assembly. | 4 | SOLD | Used. Good quality M8 bolt that also includes a standard screwdriver slot in it so you can use either an M8 socket or a regular screwdriver. | |||||
| RMI15 | N/A | Mounting bolt that fits around the crankshaft for the flywheel/magneto electrical coil assembly. Approx. M18 interior, M22 exterior. | 1 | SOLD | Used. Best installed/removed with a deep socket M22 socket wrench. | |||||
| RMI16 | N/A | Large approx. 1 5/8" in diameter mounting circlips for the flywheel/magneto electrical coil assembly. | 1 | EdsSurplusForSale.net | Used. Best installed/removed with strong snap ring pliers. | |||||
| RMI17 | N/A | Flywheel/magneto coil assembly. | 1 | SOLD | Used. Does not include 4 mounting bolts. Needs one very minor repair: one of the 3 wires from it needs to be reattached to an included very small electrical connector. | |||||
| RMI18 | N/A | Interior mounting bolt and washer for the ignition coil assembly. | 2 | SOLD | Used. It takes 2 interior mounting bolts and washers to install the plastic ignition coil assembly. The bolts and washers work but they have residual rust on them. | |||||
| RMI19 | N/A | Plastic ignition coil assembly + ignition coil wire + spark plug cap/cover. | 1 | SOLD | Used. Condition unknown. Might or might not work. Sold "as is". Rare part. Requires removal of External engine flywheel and the removal and reinstalling of 2 interior mounting bolts and washers to install this part. | |||||
| RMI20 | N/A | Exterior engine mounting bar with a U-shaped hook at the end to mount the ignition coil wire to the engine. | 1 | EdsSurplusForSale.net | Used. | |||||
| RMI21 | N/A | Engine interior and exterior base plate or stator plate that the flywheel/magneto coil assembly is mounted on. Includes wheel bearing for the crankshaft. | 1 | EdsSurplusForSale.net | Used. | |||||
| RMI22 | N/A | Mounting bolt for engine interior and exterior base plate or stator plate that the flywheel/magneto coil assembly is mounted on. | 3 | NOT FOR SALE. | Used. Each bolt has some residual rust, but it is usable. Good quality M8 bolt that also includes a standard screwdriver slot in it so you can use either an M8 socket or a regular screwdriver. screwdriver. | |||||
| RMi23 | N/A | Longer mounting bolt with very small small exterior nut for engine interior and exterior base plate or stator plate that the flywheel/magneto coil assembly is mounted on. | 1 | NOT FOR SALE. | Used. Bolt with standard flathead screwdriver slot. | |||||
| RMI24 | N/A | Interior engine clutch assembly, including a washer and spacer/bushing for the crankshaft + attached interior and exterior crankshaft holder. Does not include small foam pad that fits outside of the clutch assembly. | 1 | SOLD | Used. Also includes one
unknown part, a very thin spacer/washer, that might/might not be part of
the clutch assembly. The included unknown extra part is very thin washer. Where it fits into the moped is unknown. It is probably a crankshaft thin spacer/washer, but might also be an oversized axle spacer/washer. 20mm interior diameter, 39mm exterior diameter, 8mm tall x 9.5mm wide vertical square parts extends from a flat very thin spacer/washer. |
|||||
| RMI25 | N/A | Small foam pad that fits outside of the clutch assembly and underneath the stator plate or flywheel coil mounting/base plate. | 1 | EdsSurplusForSale.net | Used. Fully functional. Less than 10% is discolored with beige stains. | |||||
| RMI26 | N/A | Black plastic engine cover that fits onto the main metal McCulloch engine. It includes the carburetor intake valve. The carburetor fits onto this part. | 1 | EdsSurplusForSale.net | Used. | |||||
| RMI27 | N/A | Mounting bolt for the black plastic engine cover that includes a built in washer. | 4 | EdsSurplusForSale.net | Used. Rusted but functional. Good quality M8 bolt that also includes a standard screwdriver slot in it so you can use either an M8 socket or a regular screwdriver. | |||||
| RMI28 | N/A | Mounting bolt for the black plastic engine cover. | 2 | EdsSurplusForSale.net | Used. Rusted but functional. Good quality M8 bolt that also includes a standard screwdriver slot in it so you can use either an M8 socket or a regular screwdriver. | |||||
| RMI29 | N/A | Piston crankshaft needle bearing pin. Approx. 6mm long. | 31 | EdsSurplusForSale.net | Used. Caution: These fall out very easily. This very small approx. 6mm long needle bearing pin for the piston crankshaft needle bearing fits into an inside groove in the piston where the piston connects to a part that connects it to the crankshaft. This part is different from the larger crankcase crankshaft needle bearing pin, part RMI03. (Note: the piston probably requires more than 31 piston crankshaft needle bearing pins.) | |||||
| Item Num. | AMF Roadmaster Part # | Description | Quantity | Where part is listed for sale | Description | ||||
| RME01 | N/A | Engine Rear Mounting Bracket. Includes 3 rubber parts at the 6 metal washers around the rubber parts. Does not include 4 attached bolts. | 1 | EdsSurplusForSale.net | Used. Rusted but fully functional. | ||||
| RME02 | N/A | Top mounting bolt and nut for the rear mounting bracket. Might be a special hardened (i.e., extra-strong) bolt. | 3 | EdsSurplusForSale.net | Used. Bolt has special marking onit and it might be a hardened (i.e., extra-strong) bolt. Might have a very little rust. | ||||
| RME03 | N/A | Bottom mounting bolt and nut for the rear mounting bracket. Thick round M11 bolt with M8 threads. | 1 | EdsSurplusForSale.net | Used. Has a very little rust. | ||||
| RME04 | N/A | Engine 5 1/2" mounting spring with internal metal tube spring reinforcer part. | 1 | EdsSurplusForSale.net | Used. Fully functional, but it is old, discolored, and probably has some residual rust. | ||||
| RME05 | N/A | Engine lever top main black plastic 5" lever part. | 1 | EdsSurplusForSale.net | Used. | ||||
| RME06 | N/A | AMF Roadmaster Moped RME06 Black plastic side supporting part for the black plastic engine lever top. With 2 small spring mounting prongs that fit inside the 2 small springs. | 1 | EdsSurplusForSale.net | Used. | ||||
| RME07 | N/A | AMF Roadmaster Moped RME07 Black plastic side supporting part for the black plastic engine lever top. With 2 holes to insert the 2 tiny spring mounting plastic pins into. (AMF external engine part 7.) | 1 | EdsSurplusForSale.net | Used. | ||||
| RME08 | N/A | AMF Roadmaster Moped RME08 Very tiny spring mounting plastic pin. Fits into part RME08. (AMF external engine part 8.) | 2 | EdsSurplusForSale.net | Used. Very small. | ||||
| RME09 | N/A | AMF Roadmaster Moped RME09 Small metal screw for the black plastic side supporting part for the black plastic engine lever top. (AMF external engine part 9.) | 4 | EdsSurplusForSale.net | Used. Good quality M8 bolt that also includes a standard screwdriver slot in it so you can use either an M8 socket or a regular screwdriver. | ||||
| RME10 | N/A | AMF Roadmaster Moped RME10 Small metal spring for the black plastic side supporting part for the black plastic engine lever top. | 2 | EdsSurplusForSale.net | Used. Very small. | ||||
| RME11 | N/A | AMF Roadmaster Moped RME11 Metal connector part for the black plastic engine lever top. Approx. 2 long with 2 big bolt holes in it. | 2 | EdsSurplusForSale.net | Used. Partially rusted, fully functional. | ||||
| RME12 | N/A | AMF Roadmaster Moped RME12 Very small approx. 5/8" long metal cylinder that fits into the top main black plastic 5" lever part. | 1 | EdsSurplusForSale.net | Used. Very small. | ||||
| RME13 | N/A | Small metal bolt, 3 washers, and a cotter pin connector part for the black plastic engine lever top. Connects the top of the engine to the metal connector pieces from the top black plastic lever assembly. | 1 | EdsSurplusForSale.net | Used. | ||||
| RME14 | N/A | Exhaust pipe for the AMF Roadmaster moped McCulloch 49cc engine. Does not include mounting bolts or the McCulloch 49cc engine rear mounting bracket. | 1 | SOLD | Used. Rusted but presumed functional. | ||||
| RME15 | N/A | Small mounting bolt for the exhaust pipe. | 2 | SOLD | Used. Rusted but functional. |
| Item Num. | AMF Roadmaster Part # | Description | Quantity | Where part is listed for sale | Description | ||||
| RMC01 | N/A | SD17 Carburetor for the AMF Roadmaster moped McCulloch 49cc engine. (It might be a Mikuni carb since there is an "M" imprinted on it.) | 1 | SOLD | Used. Includes spring and spring-pivoting parts at the top and the black plastic float bowl and the bottom. | ||||
| RMC02 | N/A | Carburetor gasket for the SD17 Carburetor for the AMF Roadmaster moped McCulloch 49cc engine. | 1 | EdsSurplusForSale.net | Used. | ||||
| RMC03 | N/A | Black plastic carburetor shield. Might also be an airbox or air filter holder. (Designed to shield the SD17 Carburetor for the AMF Roadmaster moped McCulloch 49cc engine.) | 1 | EdsSurplusForSale.net | Used. | ||||
| RMC04 | N/A | Long approx. 2 1/2" thin M4 bolt to attach the black plastic carburetor shield to the McCulloch engine. | 2 | EdsSurplusForSale.net | Used. | ||||
| RMC05 | N/A | Long approx. 1 11/16" spacer/bushing to reinforce the 2 1/2" thin M4 bolt to attach the black plastic carburetor shield to the McCulloch engine. | 2 | EdsSurplusForSale.net | Used. | ||||
| RMC06 | N/A | Gas tank, black plastic. (For the AMF Roadmaster moped McCulloch 49cc engine). Includes 4 mounting bolts. Does not include gas tank cap, insulating part around the gas cap opening, or fuel line or fuel line clamp. | 1 | EdsSurplusForSale.net | Used. | ||||
| RMC07 | N/A | Gas cap. Includes imprinted pictures of a gas station fuel tank and an oil can to remind the user to add oil to the gas. (For the black plastic gas tank for the AMF Roadmaster moped McCulloch 49cc engine). | 1 | SOLD | Used. | ||||
| RMC08 | N/A | Insulating black foam part that fits around the gas tank opening. Used for mounting the gas to the frame. | 1 | EdsSurplusForSale.net | Used. | ||||
| RMC09 | N/A | Small fuel line clip that holds the fuel line in place Insulating black foam part that fits around the gas tank opening. Used for mounting the gas to the frame. | 1 | EdsSurplusForSale.net | Used. Small but useful. | ||||
| RMC10 | N/A | 6" of fuel line. Small fuel line clip that holds the fuel line in place Insulating black foam part that fits around the gas tank opening. Used for mounting the gas to the frame. | 1 | EdsSurplusForSale.net | Used. Must be relatively new because its still flexible. |
AMF Roadmaster
Moped Frame Parts.
Note: all parts are used and sold "as is".
| Item Num. | AMF Roadmaster Part # | Description | Quantity | Where part is listed for sale | Description | ||||
|
ARF01 |
N/A | 1978 AMF Roadmaster moped red frame. Includes pedals and kickstand. | 1 | EdsSurplusForSale.net | Used. Old and very cosmetically blemished but fully functional. Looks old and worn. Paint has faded and worn away in in places. Metal parts are rusted but fully functional. | ||||
| ARF02 | N/A | 2 small metal side clips that attach to the back of the frame. | 2 | EdsSurplusForSale.net | Used. Rusted but fully functional. | ||||
| ARF03 | N/A | Seat with seat springs and mounting bolt assembly that fits around a seat stem that is a little less than 1 1/2 inches. | 1 | SOLD | Used. Seat and seat fabric is in good shape. Bottom is very rusted by functional. | ||||
| ARF04 | N/A | Orange plastic rear fender. Does not include 3 mounting bolts. | 1 | SOLD | Used. Orange plastic is good. Decals are blemished and blotched. | ||||
| ARF05 | N/A | Rear mounting screw for the plastic rear fender. | 2 | SOLD | Used. Rusted but functional. Good quality M8 screw that also includes a standard screwdriver slot in it so you can use either an M8 socket or a regular screwdriver. | ||||
| ARF06 | N/A | Front mounting nut and bolt for the plastic rear fender. | 1 | SOLD | Used. Rusted but functional. | ||||
| ARF07 | N/A | Orange plastic pedal and chain guard. Include 3 mounting bolts and 1 mounting nut. | 1 | SOLD | Used. Fully functional. Discolored, may have some rust. Good quality M8 bolt that also includes a standard screwdriver slot in it so you can use either an M8 socket or a regular screwdriver. | ||||
| ARF08 | N/A | Rear right/left engine guard rail. J-shaped black metal part approx. 15" long. Does not include mounting bolts. | 2 | EdsSurplusForSale.net | Used. Partially rusted, paint is faded, but fully functional. | ||||
| ARF09 | N/A | Mounting nut and bolt for the rear left engine guard rail. Bolts have special markings on them and might be hardened bolts. bolts. | 2 | EdsSurplusForSale.net | Used. Slightly longer than the right side bolts. Rusted but fully functional. Bolts have special markings on them and might be hardened bolts. | ||||
| ARF09 | N/A | Mounting nut and bolt for the rear right engine guard rail. Bolts have special markings on them and might be hardened bolts. bolts. | 2 | EdsSurplusForSale.net | Used. Slightly shorter than the right side bolts. Rusted but fully functional. Bolts have special markings on them and might be hardened bolts. | ||||
| ARF10 | N/A | 3 1/2" long metal part that attaches to the top of the left engine guard rail. | 1 | EdsSurplusForSale.net | Used. Rusted but fully functional. Bolts have special markings on them and might be hardened bolts. |
| Item Num. | AMF Roadmaster Part # | Description | Quantity | Where part is listed for sale | Description | ||||
| ARForks01 | N/A | AMF Roadmaster moped red front forks. Does not include extra fork mounting parts or fork ball bearings. | 1 | EdsSurplusForSale.net | Used. In reasonable shape. Has some rust. | ||||
| ARForks02 | N/A | Rusted top mounting bolt for the red front Forks. | 1 | EdsSurplusForSale.net | Used. Rusted but fully functional. | ||||
| ARForks03 | N/A | Thin mounting washer for the red front Forks. It fits underneath the top mounting bolt and above the thick screw-in large mounting washer. | 1 | EdsSurplusForSale.net | Used. | ||||
| ARForks04 | N/A | Thick screw-in mounting washer for the red front Forks. It fits underneath the top mounting bolt and the thin mounting washer. | 1 | EdsSurplusForSale.net | Used. | ||||
| ARForks05 | N/A | Front forks top/bottom ball bearing assembly. | 2 | EdsSurplusForSale.net | Used. Has a very little
rust. The top front forks ball bearing assembly fits underneath the top mounting bolt, the thin mounting washer, and the thick screw-in mounting washer and it fits directly into the top of the moped frame where the forks fit in. The bottom front forks ball bearing assembly fits at the bottom of the front forks top stem and fits into the bottom of the hole in the frame for the front forks. |
||||
| ARForks06 | N/A | Orange plastic front fender with mounting bolt. | 1 | SOLD | Used. Decals on orange plastic have faded and front decal is discolored. Orange fender is in good shape. Metal mounting bolt to mount it to the bottom of the forks is rusted but functional. Mounting bolt is functional but rusted and is a good quality M10 bolt that also includes a standard screwdriver slot in it so you can use either an M10 socket or a regular screwdriver. | ||||
| ARForks07 | N/A | Front AMF Roadmaster moped basket. Includes 2 side reflectors. | 1 | EdsSurplusForSale.net | Rusted but fully functional. Top mounts around front fork stem. Bottom mounts around front axle. Max. carrying capacity rated at 15 lbs. |
| Item Num. | AMF Roadmaster Part # | Description | Quantity | Where part is listed for sale | Description | ||||
| ARH01 | N/A | AMF Roadmaster main handlebar. 1 long 29 1/2" wide metal part. Does not include handlebar stem, clamp, or optional horizontal bar attachment. | 1 | EdsSurplusForSale.net | Used. Rusted but still fully functional. The part that fits into the handlebar stem is ridged to increase handlebar gripping strength. | ||||
| ARH02 | N/A | Horizontal handlebar stem that inserts into the main handlebar. | 1 | EdsSurplusForSale.net | Used. Very rusted but fully functional. | ||||
| ARH03 | N/A | Mounting hex bolt for the vertical handlebar stem that inserts into the main handlebar. | 2 | EdsSurplusForSale.net | Used. Very rusted but fully functional. | ||||
| ARH04 | N/A | AMF Roadmaster Moped Handlebar stem. Labeled "WALD 4" and "A149-78". | 1 | EdsSurplusForSale.net | Used. Lightly rusted, fully functional. Rusted on the inside. Full imprinted labeling reads "WALD 4", "INSERT TO HIDE THIS LINE", with an arrow and a line, and "A149-78", with a 1 on the next line. The bottom cylinder where it inserts into the front fork stem is a little more than 3/4" in diameter. The top part has a smooth area inside that clamps around a 1" handlebar. | ||||
| ARH05 | N/A | Mounting bolt and washer for the AMF Roadmaster WALD 4 handlebar thick stem. Approx. 150mm or 6" long, M8 threads. Special marking, might be a hardened bolt. | 4 | EdsSurplusForSale.net | Used. Only very minimal rust. Approx. 150mm or 6" long, M8 threads. Special marking, might be a hardened bolt. | ||||
| ARH06 | N/A | Special odd shaped M8 lock nut for the mounting bolt and washer for the AMF Roadmaster WALD 4 handlebar thick stem. | 1 | EdsSurplusForSale.net | Used. Has a very little rust.. | ||||
| ARH07 | N/A | Special M8 mounting bolt with washer and nut to tighten the grip of the WALD 4 handlebar stem U-shaped clamp around a 1" handlebar. Slightly bent but functional. | 1 | EdsSurplusForSale.net | Used. Bolt has a square design underneath the bolt head to fit into a square hole in the WALD 4 handlebar stem. Bolt is slightly bent. Small special marking on the bolt, so it might be a hardened bolt. Washer is rusted, bolt is blemished/discolored. |
AMF Roadmaster
Moped Handlebar Control Parts.
Note: all parts are used and sold "as is".
| Item Num. | AMF Roadmaster Part # | Description | Quantity | Where part is listed for sale | Description | ||||
| ARHC01 | N/A | AMF Roadmaster Front/Rear Brake Lever. | 2 | EdsSurplusForSale.net | Front and rear brake levers are interchangeable. One brake lever has a pivot pin for the front/rear brake lever, while the other brake lever has a rusted hex/allen bolt used a pivot pin for the front/rear brake lever. (If you buy 1 brake lever, you can specify which one or want or I'll just ship you 1 of the 2 parts.) | ||||
| ARHC02 | N/A | AMF Roadmaster Front/Rear Brake Lever Mounting Assembly. | 2 | EdsSurplusForSale.net | Used. Includes handlebar mounting bolt and rusted nut. (These might be a SAE mounting bolt and mounting nut, by the way.) One of the handlebar brake lever mounting assemblies has some rust on the inside of it and it can use cleaning and derusting. (Try derusting it with water and paper towel first. Be careful because derusting sprays stain black plastic.). Sold "as is". | ||||
| ARHC03 | N/A | AMF Roadmaster Front/Rear Brake Lever Pivot Pin. | 1 | EdsSurplusForSale.net | Used. Presumed working. Has a very little amount of rust. Sold "as is". | ||||
| ARHC04 | N/A | AMF Roadmaster Moped ARHC4 Front/Rear Rusted (maybe SAE) Allen/Hex Bolt and Nut Brake Lever Mounting Pivot Pin | 1 | EdsSurplusForSale.net | Used. Presumed working. Probably SAE Allen/hex bolt is very rust at the top and bottom but it is fully functional.Sold "as is". | ||||
| ARHC05 | N/A | AMF Roadmaster front brake cable. Does not include the brake cable adjuster or the part that screws into the U-shaped end of the cable. | 1 | EdsSurplusForSale.net | Used. Cable is fully functional, slides very easily, and is in excellent shape. One cable part has a very little dirty spot that might be a very small amount of rust. | ||||
| ARHC06 | N/A | AMF Roadmaster front brake cable. Does not include the brake cable adjuster or the part that screws into the U-shaped end of the cable. | 1 | EdsSurplusForSale.net | Used. Cable is fully functional, slides very easily, and is in excellent shape. Long black cable sheath is in excellent functional shape but has some cosmetic blemishes. | ||||
| ARHC07 | N/A | AMF Roadmaster front brake cable adjuster with 16mm long hollow M6 threads and M6 brake cable adjusting nut. | 1 | EdsSurplusForSale.net | Used. Both are in good shape. 1 is clean, 1 is grimy with grease. | ||||
| ARHC08 | N/A | Handlebar horn button mounting bracket top half. | 1 | EdsSurplusForSale.net | Used. Fully functional, but in poor shape, with inside rust. Needs cleaning and derusting. Includes 1 rusted wide-threaded screw that probably isn't the original screw. | ||||
| ARHC09 | N/A | Handlebar horn mounting bracket bottom half. Damaged/broken. Includes 2 prong male electrical adapter. | 1 | EdsSurplusForSale.net | Used. Horn button is missing. Could be modified so that a thin 1mm in diameter 5mm long button switch contact could be moved to the outside of the bracket and used instead of the horn button. Dirty, has some rust. | ||||
| ARHC10 | N/A | 4" circular adjustable-length mirror with M8 mounting bolt. | 1 | EdsSurplusForSale.net | Used. Mirror surface has some blemishes and scratches but is functional with some small blotches in your view. Mirror stem is rusted. 2 small mirror adjusting bolts in the back are also rusted. |
AMF Roadmaster
Moped Electrical Parts, including Lights and Horn.
Note: all parts are used and sold "as is".
| Item Num. | AMF Roadmaster Part # | Description | Quantity | Where part is listed for sale | Description | ||||
| ARE01 | N/A | AMF Roadmaster electrical harness. | 1 | EdsSurplusForSale.net | Used. One yellow wire
sheath is broken at one point, so it might need a little extra
repair. Untested but it looks complete. In the far back, a purple wire with a female clip insert is taped with red tape to green and white wires. In the near back part, black and yellow wires with female clip inserts presumably connect to the engine. The yellow, black, green and white wires are protected by a long solid black cable sheath that extends to the front of the moped. In the near front of the sheathed cable, a small yellow wire's very thin sheath is cut and the the yellow wire might need to be patched. There are 2 female clip inserts for the horn, with 2 yellow wires and 2 green wires connecting to it. A cable sheath protecting the 4 wires extends from the horn to 3 far front locations, the light and 2 handlebar controls. 1 handlebar control extension has a 2-prong female adapter (with red and beige wires) and a second 2-prong female adapter (with orange and yellow wires). The other handlebar extension has 1 male 2 prong adapter (with white and red wires.). The light is connected to with a female 3 pronged adapter. The 3-prong light adapter has white and blue wires connecting to one prong, green, red, and beige wires connecting to another prong, and the black engine wire connecting to the third prong. |
||||
| ARE02 | N/A | GE 6-volt 4 1/4" in diameter moped headlight. Tested working.. | 1 | SOLD | Used. Tested working. It has the following text printed on the back of it: "5 6V 8", "GE 4667-1", "SAE N 78", "DOT", "MADE IN USA", "143". | ||||
| ARE03 | N/A | Rubber headlight cover for 4 1/4" moped headlight. It fits around a headlight bucket 4 3/4"- 4 7/8" in diameter. | 1 | SOLD | Used. This cover provided a complete cover for a 4 1/4" headlight. 2 of the 3 fold in insert are very lightly cracked, but still functional. Mildly dirty, can use some cleaning. Has some dirt that might be rust on the inside of it. "MFG. BY JOHN W. HOBBS CORP...." is imprinted on the front. | ||||
| ARE04 | N/A | Red headlight bucket, 4 3/4" - 4 7/8" in diameter. Includes 2 female clip electrical adapters for the 6 volt headlight, 3 pronged male electrical adapter for electricity for the headlight and M13 mounting bolt. Does not include 4 1/4" 6 volt headlight, rubber headlight cover, or the handlebar mounting clamp or M13 washer and M13 nut. | 1 | EdsSurplusForSale.net | Used. One electrical connection was tested working. Red paint is faded. Has 3 small rectangular holes for the rubber headlight cover to fit into. Imprinted on the back is the following: "SAE N 78", "HOBBS 25536", "23 8". A label on top reads "RIDE CAREFULLY", "1hp. 20mph.", "max. rider wt. 215 lbs.". | ||||
| ARE05 | N/A | M13 mounting clamp for the headlight bucket. U-shaped clamp to connect an M13 bolt to a 1" handlebar. Does not include M13 bolt, nut, or washer. | 1 | EdsSurplusForSale.net | Used. Currently bent so it could be removed from a 1" handlebar. Dirty, might even have a little rust. | ||||
| ARE06 | N/A | M13 mounting washer for headlight bucket. Has a gear shaped design on the inside, presumably to increase gripping power. | 1 | EdsSurplusForSale.net | Used. Dirty, has some rust. | ||||
| ARE07 | N/A | M13 mounting nut for headlight bucket. | 1 | EdsSurplusForSale.net | Used. Has a little dirt, might have a little rust. | ||||
| ARE08 | N/A | 6 volt horn, untested. Includes 1 small M5 mounting bolt. Does not include mounting assembly. | 1 | SOLD | Used. Tested working using 4 AA batteries. (When I tested it, it twice briefly produced a horn sound.) Presumably a 6 volt AC horn. Has 2 male adapters approx. 6.5m wide by 9mm long for electrical power. "NIKKO" and "MADE IN JAPAN" are imprinted on the back. Has some rust on it. | ||||
| ARE09 | N/A | Very small horn mounting assembly. Includes rubber double washer part to serve as a slight shock absorber for the horn. Fits a horn with an M5 mounting bolt, connects the moped by 2 M6 nuts and bolts. | 1 | EdsSurplusForSale.net | Used. "AC 6v" is imprinted on it. | ||||
| ARE10 | N/A | M6 mounting nut and bolt for the small horn mounting assembly. | 1 | EdsSurplusForSale.net | Used. Rusted but functional. There are special markings on the bolt, so it might be a hardened bolt. |
AMF Roadmaster
Moped Wheel Parts Including Brakes.
Note: all parts are used and sold "as is".
| Item Num. | AMF Roadmaster Part # | Description | Quantity | Where part is listed for sale | Description | ||||
| ARW01 | N/A | Complete front brake plate with brakes and extra part to screw onto the brake cable. | 1 | EdsSurplusForSale.net | Used. Rare
part. Need good front brakes? Just buy this part for your AMF
Roadmaster 49cc moped and install it. Both brake pads are approx. 3.5mm thick. The brake plate assembly has internal rust and some external rust, but should work fine. |
||||
| ARW02 | N/A | Complete rear brake plate with brakes and extra part to screw onto the brake cable. Also includes the extra clamp to clamp the front part of it onto the moped frame. | 1 | EdsSurplusForSale.net | Used. Rare
part. Need good rear brakes? Just buy this part for your AMF
Roadmaster 49cc moped and install it. Both brake pads are approx. 3.5mm thick. The brake plate assembly has internal rust and some external rust, but should work fine. |
||||
| ARW03 | N/A | Front axle with M13 threads. | 1 | EdsSurplusForSale.net | Used. | ||||
| ARW04 | N/A | Mounting washer that mounts the axle into the front forks. | 2 | EdsSurplusForSale.net | Used. Rusted but functional. A very small but critical unique part. | ||||
| ARW05 | N/A | 9mm wide M13 front axle nut. (Probably fits on the non-brake side of the front wheel.) | 1 | EdsSurplusForSale.net | Used. Fits M13 rear axle too. | ||||
| ARW06 | N/A | 6mm wide M13 front axle nut. (Probably fits on the brake side of the front wheel.) | 2 | EdsSurplusForSale.net | Used. | ||||
| ARW07 | N/A | Very thin M13 front axle washer. | 2 | EdsSurplusForSale.net | Used. | ||||
| ARW08 | N/A | Front wheel, damaged, needs work to be functional. Does not include front brakes. | 1 | EdsSurplusForSale.net | Used. Needs
work. The wheel doesn't rotate smoothly after I opened it up.
Maybe the ball bearings need repositioning or maybe even replacing.
Includes wheel and ball bearings and the ball bearing side parts that
screw onto the axle. All ball bearings are probably there, but one
or more ball bearings might be missing. Wheel bearings are probably out of place, might need more ball bearings. Tire holds air but is cracked and need replacing. Rim is rusted, brake plate interior is rusted but presumed functional. |
||||
| ARW09 | N/A | Rear axle with M13 threads. | 1 | EdsSurplusForSale.net | Used. | ||||
| ARW10 | N/A | 9mm wide outside M13 hexagonal rear axle nut. (One fits on the outside each side of the rear axle.) | 2 | EdsSurplusForSale.net | Used. Fits on M13 front axle too. | ||||
| ARW11 | N/A | 24mm tall 4mm wide M13 hexagonal rear axle nut. (One fits on each side of the rear axle.) | 1 | EdsSurplusForSale.net | Used. | ||||
| ARW12 | N/A | Very thin M13 rear axle washer. (One fits on the outside each side of the rear axle.) | 2 | EdsSurplusForSale.net | Used. | ||||
| ARW13 | N/A | 6mm wide rear axle spacer/bushing. (Fits on the brake side of the rear axle.) | 1 | EdsSurplusForSale.net | Used. | ||||
| ARW14 | N/A | 2mm wide M13 hexagonal rear axle washer. (Fits on the brake side of the rear axle.) | 1 | EdsSurplusForSale.net | Used. | ||||
| ARW15 | N/A | Rear wheel, damaged, with bent rim. Needs work in order to be usable. Includes rear sprocket, does not include brakes or rear axle. | 1 | EdsSurplusForSale.net | Used. Tire
and tube need to be replaced. Rim is bent and should be replaced in
order for it to be functional. If you buy it with the rear axle, the rear axle and hub should work together. However, the rusted rear wheel rim is bent and should be replaced. Spokes look OK so they should be reinstallable in a new rear wheel rim. Bottom line: this rear wheel will not work as is but requires repair work. If you buy it with the rear axle and replace the rear rim and carefully and properly reinstall the spokes, you should have a nice rear wheel without the rear brake. You will also need a rear brake and specific extra axle nuts, washers, and spacers, to have a complete functioning rear wheel. |
||||
| ARW16 | N/A | Old AMF Roadmaster moped chain. | 1 | EdsSurplusForSale.net | Used. Stiff, needs lubrication in order to work properly. Sold "as is", with no legal liability whatsoever for the seller. |